Nature 2 Mineral Cartridge for hot tub spas

Bestsellers

Hurricane E2550-020 Proshield G heater assembly fo... FS-11 Starter for tanning beds Waterway Mini Storm Jet Diffuser 218-6930 Waterway Poly Storm Jet Diffuser 218-4000 S-12 Starters for tanning beds Wolff Diamond Sun S Tanning Bed Lamps Bulbs Wolff Velocity Tanning Bed Lamps Bulbs RAVE Tanning Bed Lamps Bulbs Generic Heater Pump Gaskets and O-Rings for hot tu... Balboa Spa Side Panel Light for hot tub spas

Site Information

Gift Certificates Privacy Policy About Us Links Contact Us Site Map

Testimonials

• The heater was bad. Not the circuit board. Your advice saved me a bunch of money. THANKS AGAIN!!!!!!!!

• I would like to thank John for his assistance, patience, responsiveness and overall excellent customer service....Mike Willard

• I was having a pump problem and talked with John. WOW, it was like going back 20 years,no press 1 for this and 2 for that

• I received the unit on Friday and installed it Saturday.....it worked just GREAT, finally a 104 degree hot tub.

• I now know the one and only place for my spa supplies. I'll tell everyone I know to shop your site....again....THANKS Tony C.

• John was great help in ordering and answering questions. My spa is back in action. Bill Baldwin

Click to see more testimonials

Home » Chemicals Spa Hot Tub

Product Details

View Larger Image

Nature 2 Mineral Cartridge for hot tub spas

SKU: 2500

Overview

Spa Recipe

Ingredients
Nature2 Purifier
Non-chlorine oxidizer (potassium peroxymonosulfate)*
Nature2 Spa Test Strips** or Test kits (pH, total alkalinity)
pH and total alkalinity adjusting chemicals
Dichlor

When:	What to do:
Purifier Start Up	Drain and refill your spa. Balance water per dealer guidelines. Add 1 teaspoon of dichlor to spa per 250 gallons (approx. 1000 litres). (Note: 1 teaspoon = 1/4 ounce = 7 grams.)
Every Day	Run spa according to recommendation supplied to you by the manufacturer of your spa
Before Each Use	Add 1 tablespoon of potassium peroxymonosulfate (MPS) to spa per 250 gallons (approx. 1000 litres) (Note: 1 tablespoon = 1 tablet = 3/4 ounce = 21 grams.) A convenient way to insure proper MPS level is to use a Nature2 Spa Test Strip. If the Nature2 Spa Test Strip indicates a low level of MPS, add 1 tablespoon of MPS to spa per 250 gallons and retest.
Once A Week	Add 3 tablespoons of potassium peroxymonosulfate to spa per 250 gallons (approx. 1000 litres). Check and adjust pH and total alkalinity. A convenient way to check pH and total, alkalinity levels is to use a Nature2 Spa Test Strip.
Every 4 Months	Drain and refill your spa. Replace Nature2 purifier, repeat purifier start-up.
As Needed	If water looks hazy, shock treat with 1 teaspoon of dichlor per 250 gallons (approx. 1000 litres)

Important The Nature2 Spa Purifier is not to be used with products containing bromine, sodium bromide or biguanides. If these products are being used, be sure to drain and refill spa with fresh water. Note: As an alternative to potassium monopersulfate, dichlor may be substituted: 1 teaspoon dichlor = 3 tablespoons potassium peroxymonosulfate. The use of an efficient ozone generator with Nature2 may reduce the need for supplemental chemical treatments. * Potassium peroxymonosulfate may cause a lowering of the pH and total alkalinity of your spa water. Please monitor pH and total alkalinity at least once per week and adjust accordingly.