Categories
Specials Bestsellers Accessories Spa Hot Tub Chemicals Spa Hot Tub Covers Tops Lids Spa Hot Tub Repair Parts Spa Hot Tub Accessories Sun Tan Bed Bulbs Lamps Sun Tan Beds Repair Parts Sun Tan Beds Parts for Jetted Bath Tubs Pool and Spa Parts
Bestsellers
Hurricane E2550-020 Proshield G heater assembly fo...
FS-11 Starter for tanning beds
Waterway Mini Storm Jet Diffuser 218-6930
Waterway Poly Storm Jet Diffuser 218-4000
S-12 Starters for tanning beds
Wolff Diamond Sun S Tanning Bed Lamps Bulbs
Wolff Velocity Tanning Bed Lamps Bulbs
RAVE Tanning Bed Lamps Bulbs
Generic Heater Pump Gaskets and O-Rings for hot tu...
Balboa Spa Side Panel Light for hot tub spas
Site Information
Testimonials
• The heater was bad. Not the circuit board. Your advice saved me a bunch of money. THANKS AGAIN!!!!!!!!
• I would like to thank John for his assistance, patience, responsiveness and overall excellent customer service....Mike Willard
• I was having a pump problem and talked with John. WOW, it was like going back 20 years,no press 1 for this and 2 for that
• I received the unit on Friday and installed it Saturday.....it worked just GREAT, finally a 104 degree hot tub.
• I now know the one and only place for my spa supplies. I'll tell everyone I know to shop your site....again....THANKS Tony C.
• John was great help in ordering and answering questions. My spa is back in action. Bill Baldwin
Click to see more testimonials
Product Details
|
Plumbing stop leak sealer for hot tub spas and pools
SKU: 3505
|
Overview
Spa Maintenance:
Use as needed when small leaks occur.
1. Remove filter cartridge, grids from D.E. filter or media from other types of filters.
2. Add 1/3 bottle for spas or entire bottle for pools.
Pour as close to skimmer or main drain as possible.
3. Turn ON only the circulation system.
Do not turn on heater or air blower.
4. Run recirculation system for 5 hours for spas and 10 hours for pools.
5. Refill spa or pool to proper level and let stand long enough to determine if leak is sealed.
6. If leak is sealed, drain the spa and refill.
For pools, normal operation can be resumed.
7. If leak is not sealed, repeat steps 1-6.
Use as needed when small leaks occur.
1. Remove filter cartridge, grids from D.E. filter or media from other types of filters.
2. Add 1/3 bottle for spas or entire bottle for pools.
Pour as close to skimmer or main drain as possible.
3. Turn ON only the circulation system.
Do not turn on heater or air blower.
4. Run recirculation system for 5 hours for spas and 10 hours for pools.
5. Refill spa or pool to proper level and let stand long enough to determine if leak is sealed.
6. If leak is sealed, drain the spa and refill.
For pools, normal operation can be resumed.
7. If leak is not sealed, repeat steps 1-6.
Reviews
Add Your ReviewCurrently there are no reviews for this product. Share your opinion with others, be the first to write a review.
