Panel Light Replacement bulb for any Balboa panel equipped with back lighting. 14V, 1.1W

Choose the parts you need from drop down list
Contact us for complete pumps are avail.
Parts for Dura-Jet DJ Series Pumps

Pump split nuts will replace a standard pump union nut
You will not have to replace an entire pump union just because the nut is broken

Most of these jets are no longer avail.
Jet bodies and some parts are still avail
See photo tab of styles currently avail.

Contact us for what is avail.

Universal Pressure Switches will about switch application
3902 replaces all pilot duty and milli volt gas heater applications.
3925 replaces all 25 amp electric heater applications.
Available with or w/o brass adapter fittings

Always discharge a capacitor before handling it by shorting out the two terminals to a ground.
Capacitors are not returnable so chose carefully
Bad capacitors will prevent a motor from starting or running.
The run capacitor is usually locate

Chose the part # you need from part #
Magicmend Pipe extender fittings
Simply cut the bad fitting and remove it from the system.
Glue the correct size Magicmend into place and replumb your new fitting.

Part # | Description | Manf

2 Split Heater Nuts
We also have split nuts for pumps
Part# Description
89-238-1040 Fits 2"" heater tubes
3-1/16"" across threaded side
2-1/4"" across back side

We have all the laing pump models you might need for a hot tub or spa
Contact us for help matching up your old laing pump to the new models.

waterway plumbing manifolds for hot tub spas
Some of these may be discontinued
Part # | Description | Manf. #
55-270-2290 Manifold, 2"s x 2"spg x (6) 3/4" barbs 672-7150

waterway hi-flow pump wet end parts
Chose the part # you need from the drop down list.

Waterway Plastics Side output LO-PRO injector.

Replacement Parts for the Aqu Flo-Master XP/ XP2 Series Pump
Choose the part #'s you need or order a complete wet end

There are older versions of this pump and body parts for the older wet ends are NLA but internals are same.

"Len Gordon Universal Pressure Switchs
This 1/8"" threaded will replace so many switches out there.
Will easily replace the balboa barksdale 30408
"

Please look at the part # on your old fitting
Nuts:2-1/2 is 4 inches OD
2 is 3-5/16 OD
1.5 is 2-7/8 OD

* Mr. Sticky's Underwater Glue 30 grams

Uses:

Most people want to know what is different about this adhesive versus existing glues.
Three breakthroughs are most amazing:

First, Mr. Sticky's Underwater Glue actual

Waterway Plastics Top-Flo air injector.

Flow Thru Heater Element
Allows for installation in heaters with or without thermowells.
Terminals are spaced 1-1/4" apart, supplied with hardware.
Metal bulkheads. 1.375/5.5kW 120/240v 10" Long.
This element will fit just

Jacuzzi J, JCM, K, KM Series Pump parts
Internal parts also fit hercules black max force one wet ends but housing parts will not fit the Hercules

Please check the #"s you need closely when ordering
Add items to card to see exact

"Gunite air button Great for surface mount concrete deck applications • standard color white • also available in chrome & gold • 1"" and 1-1/4"" sizes"

Laing spa circulation pumps are easy to service.
The rotor is usually out of balance and what causes the pump to quit.
Click here for repair guide

1.5 Split Heater Nuts
We also have split nuts for pumps
Part# Description
89-238-1015 Fits 1.5"" heater tubes
2-7/16"" across threaded side
1-15/16"" across back side

Aqua flow brand pump unions
Choose the part # you need from the list shown below

waterway plumbing manifolds for hot tub spas
Some of these may be discontinued
Part # | Description | Manf. #
55-270-2285 Manifold, 2"s x 2"spg x (4) 3/4" barbs 672-7140