Hot Tub Spa Parts, Heaters, Filters, Relays, Timers, Switches, Pumps, Motors, Jets, Ozonators, Air Blowers, Motors

Testimonials

• The heater was bad. Not the circuit board. Your advice saved me a bunch of money. THANKS AGAIN!!!!!!!!

• I would like to thank John for his assistance, patience, responsiveness and overall excellent customer service....Mike Willard

• I was having a pump problem and talked with John. WOW, it was like going back 20 years,no press 1 for this and 2 for that

• I received the unit on Friday and installed it Saturday.....it worked just GREAT, finally a 104 degree hot tub.

• I now know the one and only place for my spa supplies. I'll tell everyone I know to shop your site....again....THANKS Tony C.

• John was great help in ordering and answering questions. My spa is back in action. Bill Baldwin

Click to see more testimonials

Air Blowers, Motors, Parts	Air Buttons
Air Controls	Air Injectors
Air Switches	Circuit Boards
Circulation Pumps	Contactors, Relays
Control Panels, Spa-Side	Control Systems, Air Switched
Control Systems, Electronic	Electrical Supplies
Filter Cartridge Elements	Filter Housings, Parts
Fittings, Manifold	Fittings, Plumbing Repair
Fittings, Suction	Fittings, Pump Union
Flow Switches	Heat Recovery Systems
Heater Assemblies, Flo Thru	Heater Assemblies, Generic
Heater Assemblies, Low Flo	Heater Elements, Flange
Heater Elements, Flo Thru	Heater Elements, Screw In
Heater Housings, Flo Thru	Heater Housings, Plastic
Heater Parts, Electrical	Heater Parts, Fittings
Jets and Parts	Motors, Parts
Ozonators	Plumbing Supplies
Pressure Switches	Pumps, Complete
Pump Wet Ends, Parts	Temperature Sensors
Time Clocks	Transformers
Valves

SKU: 26-578-1000	Q8DS Flow Switch for hot tub spas Q8DS Flow Switch 25 amps- minimum flow rate, 8gpm. Includes 1-1/2" x 2" drag strips. 1"npt threaded fitting. Part # Description Manf. # 26-578-1000 1"npt flow switch Q8DS/A/10593 89-575-2027 Tee, reduci $96.36

SKU: 47-371-1210	Flow Thru Manifolds for hot tub spas Flow Thru Manifolds for hot tub spas Stainless steel with side indent grooves and cover. 1/8 npt pressure switch tap 2 inch QD tailpieces included. Element sold separately. Part # Description 47-371-1210 Flow thru manifold 10 $68.65

SKU: 58-138-1150	Balboa 51219 Analog Duplex Control Spa Side Panel for hot tub spas Spa-side Control for balboa instruments spa packs Analog Duplex Panels These panels replace duplex product and utilize a "phone plug" type connector, 8 $210.18

SKU: 47-555-2002	1 inch Screw In Heater Element for hot tub spas Screw In Type Heater Elements 1"npt Screw Plug Heater Element Dual 5/16" Thermowells, 10-32 thd studs Part # Description "A" Dim. 47-555-2002 1.5kW/120v 6-5/8" 47-555-2011 1.0/4.0kW, 120/240v 11 $64.40

SKU: 47-555-2005	1 inch Screw Plug, Screw on Terminals, Heater Element for hot tub spas Screw In Type Heater Elements 1inch Screw Plug, Screw on Terminals No thermowells, 1.5kW/120v $73.92

SKU: 46-238-1104	Balboa 50069 Heater Assembly for hot tub spas Balboa Instruments Balboa Stainless steel replacement heater assembly 1.0kW/120v with pressure switch. 1-1/2" x 8-1/2" manifold includes tailpieces. Part # Description 46-238-1104 Heater assyembly, Balboa 1.0kW/120v $230.54

SKU: 60-134-1000	20 amp GFCI for hot tub spas 20 amp GFCI In-line models from Leviton deadface or 20 amp plug face. Part # Description Manf. # 60-134-1000 Deadfront, ivory 6590-I 60-134-1010 Deadfront, black 6590-B 60-134-1005 20 amp plugface, ivory 6599-I $46.33

SKU: 47-555-2015	1 Inch Screw Plug, Cal Spa, Ramco Heater Element for hot tub spas Screw In Type Heater Elements 1" Screw Plug, Screw on Terminals No thermowells, 5.5kW/240v rating. Part # Description "A" Dim. 47-555-2015 5.5.kW/240v++ 15-3/8" ++ CalSpa, Ramco Note: $59.01

SKU: 60-134-1020	High Current GFCI for hot tub spas High Current GFCI Adds ground fault protection to 30 or 50 amp loads powered through 3 and 4 wire circuits that include a grounded neutral. This high current GFCI must be used in conjunction with a switching relay or contactor for 3 or 4 wire c $104.65

SKU: 89-238-1037	Snap Nuts for hot tub spa heaters Snap nuts are used in place of the older style split nuts with screws. Part # Description 89-238-1037 1-1/2" snap nut (metal only) 89-238-1039 2" snap nut (metal only)* *no longer avail, use a split nut $4.00

SKU: 47-225-1000	Coates Heater Element for hot tub spas Coates Heater Replacement Element 2-1/2" x 5" plate used in 6-IL in-line heater assy. Brass plate has (2) 1/2"npt holes for thermowells (purchased separately) and (1) 1/8"npt pressure switch tap, gasket included. $162.86

SKU: 58-138-1160	Balboa Lite Digital Control Spa Side Panel for hot tub spas Spa-side Control for balboa instruments spa packs Lite Digital Panel This panel replaces Lite Digital product. It also utilizes the $138.00

Categories

Bestsellers

Site Information

Testimonials

Repair Parts Spa Hot Tub

Search

Login

Sale Item