Product Overview You will need one flange, either A,B or C You will also need the correct element from D You can replace any of the 5 x 5 plate heaters made with these components. 5"x 5" Universal heater components. Choose from several styles of flanges and combine with your choice of heater element to make a heater for any application. (A) Universal Flange 5"x 5", dual 5/16" thermowells mounting studs for thermodisc and current collector. Used in many heaters with plastic or metal manifolds. Do not use with Hydro-Quip, Aquatherm, Sunwave or Vita Spas. See below. Part # Description 47-371-1651 Flange only, element sold separately 47-555-1021 1/8"npt brass plug (B) Hydro-Quip/Aquatherm Flange 5" x 5", dual 5/16" thermowells, studs for thermodisc and current collector. 1/8"npt pressure switch tap. Studs for elmwood self resetting sensor (redundant hi limit) found on Hydro-Quip, Aquatherm, Sun Wave. Part # Description 47-371-1652 Flange only, element sold separately 47-355-1100 Self resetting hi limit (C) DM/Vita Spa Flange 5" x 5" dual 5/16" thermowells, studs for thermodisc and current collector. 1/8"npt pressure switch tap. Note– stud for current collector is rotated 90° to allow for proper orientation of the current collector to the manifold. Use only in DM/Vita Spas. Part # Description 47-371-1653 Flange only, element sold separately (D) Coil Heater Element Supplied with hardware Part # Description "A" Dim. 47-555-2051 1.375/5.5kW, 120/240v, steel bulkhead 4" 47-371-3100 1.375/5.5kW, 120/240v,EP Heater™ design 4" 47-371-4100 1.375/5.5kW, 120/240v, tefel coated 4-1/2" 47-371-4105 1.375/4.0kW, 120/240v, tefel coated 4-1/2" |
||||||||||||||
