Product Overview
Always discharge a capacitor before handling it by shorting out the two terminals to a ground. Capacitors are not returnable so chose carefully Bad capacitors will prevent a motor from starting or running. The run capacitor is usually located on top of the motor like a camel hump. The start capacitor is usually smaller and is located on the back of the motor under the cover Some motors have the start capacitor located on the outside next to the run capacitor. A bad start capacitor will make the motor hum and not start, or start very slowly. Also a bad start capacitor will sometimes look like it has been shot from the inside out the little weep hole It also may have a black tar like substance dripping out. Technically you need a test meter to check capacitors. Contact us for help Start Capacitors Part # | Description | Manf. # | Size (Dia. x Hgt.) 35-125-1001 | 88-108MFD, 125 volt BC-86 1-7/16" x 2-3/4" 35-125-1000 | 108-130MFD, 125 volt BC-108 1-7/16" x 2-3/4" 35-125-1005 | 124-149MFD, 125 volt BC-124 1-7/16" x 2-3/4" 35-125-1010 | 135-156MFD, 125 volt BC-130 1-7/16" x 2-3/4" 35-125-1015 | 145-175MFD, 125 volt BC-145 1-7/16" x 2-3/4" 35-125-1020 | 161-193MFD, 125 volt BC-161 1-7/16" x 2-3/4" 35-125-1025 | 189-227MFD, 125 volt BC-189 1-7/16" x 2-3/4" 35-125-1030 | 200-240MFD, 125 volt BC-200 1-7/16" x 2-3/4" 35-125-1035 | 216-259MFD, 125 volt BC-216 1-7/16" x 2-3/4" 35-125-1040 | 243-292MFD, 120 volt BC-243 1-7/16" x 2-3/4" 35-125-1045 | 270-324MFD, 125 volt BC-270 1-7/16" x 2-3/4" 35-125-1050 | 324-388MFD, 125 volt BC-324 1-7/16" x 2-3/4" 35-125-1052 | 400-480MFD, 125 volt BC-400 1-13/16" x 3-3/8" 35-125-1054 | 540-648MFD, 125 volt BC-540 1-7/16" x 4-1/2" * 35-125-1055 | 53-64MFD, 240 volt 157699031 1-7/16" x 2-3/4" * 35-125-1056 | 53-64MFD, 240 volt BC-53M-250 1-7/16" x 3-7/8" 35-125-1060 | 36-43MFD, 250 volt BC-36M-250-S 1-7/16" x 2-3/4" 35-125-1065 | 64-77MFD, 250volt BC-64M-250 1-13/16" x 3-3/8" 35-125-1070 | 64-77MFD, 250volt BC-64M-250-S 1-7/16" x 2-3/4" * Be careful in your selection, same description, different size. Run Capacitors Part # Description Manf. # Size (Dia. x Hgt.) 35-125-1100 | 15MFD, 370 volt 5VR0153 1-3/4" x 2-7/8" 35-125-1105 | 17.5MFD, 370 volt 5VR0173 1-3/4" x 2-7/8" 35-125-1115 | 20MFD, 370 volt 5VR0203 1-3/4" x 2-7/8" 35-125-1120 | 22.5MFD, 370 volt 5VR0223 1-3/4" x 2-7/8” 35-125-1125 | 25MFD, 370 volt RD-25-370 1-3/4" x 2-7/8" 35-125-1130 | 30MFD, 370 volt RD-30-370 1-3/4" x 2-7/8" 35-125-1135 | 35MFD, 370 volt RD-35-370 2" x 3-3/4" 35-125-1140 | 50MFD, 370 volt 319-0001 2" x 3-3/4" 35-125-1145 | 7.5MFD, 370 volt 17035501 2" x 1-1/4" oval x 2-5/8" 35-125-1150 | 10MFD, 370 volt 17035502 2" x 1-1/4" oval x 3-1/8" |
|||||||||
