Gecko S Class SC MP Controls for hot tub spas

Gecko S Class SC MP Control
Part # 3-72-7107 is:
SC-MP-P122-P212-P311-01-CP1-AU11-LS-U-JJC-NE
Heater sold separately. For heater options, contact us
Compatible Topsides:
K-18, K-19, K-35


Part #3-72-7108 is:
SC-MP-P121-P211-O1-CP1-NE-LS-H4.0-JJC-SBD1
This unit will run:
Pump 1- 2 speed, Pump 2 or Blower -1 speed and a circulation pump
Uses the standard S Class topsides K-9,K-18 or K-19
Note: When the spa temperature rises 2 °F above the desired set point (this may occur in hot climates), the circulation pump is normally shut off to allow the water to cool back down to the desired set point, at which point the Circulation pump output is re-activated.

Jumper Number	Function	Position 1 (Left)	Position 2 (Right)
JMP-1	Input Current mode	HC 48Amp	LC 32Amp
JMP-2	Pump1 Configuration	Dual-Speed	Single-Speed
JMP-3	Circulation pump Configuration	Installed	Not Installed