Product Overview
HT Series The Len Gordon Co’s HT Series safety air switch control packages are designed specifically for pump motor heat transfer systems. There are two models to choose from, each with its own deck control. Both models operate in essentially the same manner, providing thermostatic control of the pump motor as well as a 10-minute time delay and air activated hi limit reset. The HT-1000-Y2K/HT-2000-Y2K is a smaller box containing one air switch that controls the pump and an electronic hi limit which is reset by the same button controlling the pump. The Micro-Topside control is substantially smaller and may only be used with the HT-1000-Y2K/HT-2000-Y2K controls. Must order pump cord separately. (see details) Some parts needed may not be included with system part # so contact to be sure. Product Details Ordering Information Part # Description Manf. # 58-439-2605 2001-2SS-HT-1TD deck control for HT1-TD-99 930900-516 58-439-1052 2001-2SS-HT-1TD faceplate label only (required) 930222-201 58-439-2620 HT-1000-Y2K 120v heat transfer control system, w/GFI cord 5' 936540-003 58-439-2622 HT-2000-Y2K 240v heat transfer control system, w/GFI cord 5' 936550-003 58-439-2625 Micro topside control for Y2K series (no air button) 931213-000 58-439-2627 Micro topside faceplate label (required) 930113-101 59-439-1300 Button body assembly 951590 59-439-1315 Trim kit for button body assembly, black 951607 60-320-1070 3 pin 3 conductor amp pump cord 14/3 x 60" |
|||||||||
