Product Overview Thermostats
Single pole rated at 25 amps with max temp rating at 107°F. Best results are
obtained when the bulb is installed in a dry well or groove tube at or immediately
before the heater. This is a safety device! If it if found to be out of calibration, do
not attempt to perform a field adjustment! Replace bad thermostat with a new one. Product Details To match up your thermostat, measure the diameter (1/4" or 5/16") of the bulb (large end) and then also the length of the capillary tube. SP models have 2 terminals and SPDT have 3 terminals. |
||||||||||||
